This stove paint gives a matt black finish, which is heat resistant up to 650°C (1200°F approx.).  It is suitable for a range of uses, including wood or multi-fuel stoves, coal or log effect gas fires, grates, baskets and fire backs.

Directions for use

For best results, it is recommended that painting is performed outdoors or in a well ventilated garage or shed away from items that can be affected by paint drift. To prevent inhilation wear a suitable mask

1) Ensure surface to be treated is cool and fire is out.

2) Remove all rust, scale and  dirt with a abrasive paper and/or a wire brush

3) De grease and check surface is dry before painting .

4) Mask area not to be pinted. If painting is to be performed in situ, carefully mask off any areas that do not require painting, cover all soft furnishings and ventilate the room. Leave protective covers down for at least one hour after painting.

5) Before painting shake the can vigourously for at least one minute and again between bursts

6) Spray thinly and evenly over the surface. Two thin coats are better than one thick coat.

7) After use, invert the can and spray for a few secondsto clear the nozzle.

8) Allow 2-3 hours between coats. Allow 24 hours before using near a fire

Frequently asked questions